Do you own a KitchenAid dishwasher? If so, then you likely understand the convenience and reliability that it provides for washing your dishes. However, if you see the clean light blinking, then something has gone wrong with your appliance – and you may be wondering what to do next. Fortunately, there are many steps you can take to troubleshoot and fix the issue. To help you out, we’ve outlined the most common solutions for when you see the clean light blinking on your KitchenAid dishwasher.
Understanding the Problem
The first step to fix any dishwasher issue is to understand the problem. When the “Clean” light starts blinking on your KitchenAid dishwasher, it usually indicates one of two things: either a longer wash cycle is needed, or there is a problem with the appliance itself. To figure out the issue, start by running a diagnostic test using the control panel.
If the diagnostic test does not reveal any issues, then it is likely that the dishwasher needs a longer wash cycle. To do this, press the “Cancel/Drain” button and then select the “Heavy” cycle. This will increase the length of the cycle and should resolve the issue. If the “Clean” light continues to blink, then it is likely that there is a problem with the appliance itself and you should contact a professional for assistance.
Checking the Detergent Dispenser
If the diagnostic test indicated a longer wash cycle is needed, then it’s possible that there was an issue with your detergent dispenser. This could be due to clogs or faulty connections. You can check these yourself by opening your detergent dispenser and looking at the seals or connections that may have become blocked or damaged. If the connections look fine, try manually cleaning out the dispenser with soapy water. This should help the cycle run correctly.
If the issue persists, you may need to replace the detergent dispenser. This is a relatively simple process and can be done with a few basic tools. Make sure to disconnect the power to the washing machine before attempting to replace the dispenser. Once the new dispenser is installed, you should be able to run a diagnostic test to ensure that the issue has been resolved.
Examining the Filter
When examining your KitchenAid dishwasher for a blinking clean light, you should also check the filter. A buildup of food particles or grease could be causing your cycle to take longer than usual, which could explain why the light is blinking. To clean the filter, open the interior and locate it near the bottom of the dishwasher. Make sure to remove any debris or visible buildup and rinse off the filter with soapy water. This should help get your dishwasher running correctly again.
Cleaning the Spray Arms
In addition to inspecting the filter, you may also want to clean the spray arms as part of your troubleshooting process. These are located underneath the top rack of your dishwasher and are responsible for spraying soapy water throughout the interior. If they become blocked or clogged with food particles, then the dishwasher won’t be able to properly clean them. To clean them, take out the arms, fill a sink or bucket with warm water and soap, and scrub off any dirt or food particles. Once you’ve finished cleaning them, make sure to reinstall them back in the dishwasher before running another diagnostic cycle.
Troubleshooting Tips to Fix a Blinking Light
If the above steps haven’t resolved your issue and your clean light is still blinking, then there may be an issue with your KitchenAid dishwasher itself. Here are some troubleshooting tips to help:
- Check for any kinks in your water line.
- Check for any clogs in drain hoses, fill or standpipe traps.
- Make sure that all components are properly connected and secured.
- Check for any loose screws.
Resetting the Control Panel
If your diagnostic test indicated there was an issue with your dishwasher, then it may be necessary to reset it by pressing and holding both the High Temperature Wash and Delay Start buttons at the same time. This should reset your control panel and return it to its default settings – giving you a fresh start in fixing your dishwasher.
Replacing Faulty Parts
If all of these troubleshooting tips still don’t resolve your issue and your blinking light doesn’t turn off, then replacing any faulty parts may be necessary. You can do this yourself by referring to a service manual or by hiring a repair technician. Either way, make sure to get your machine back up and running as soon as possible.
Preventative Maintenance Tips
Once you’ve fixed your KitchenAid dishwasher, it’s important to take steps to prevent issues from occurring in the future. To do this, make sure to clean out the filters regularly and check for any clogs or blockages in your pipes. Another good preventative measure is to leave your door open after each use to allow moisture to escape and help prevent any leaks from occurring.
By following these tips, you can help maintain a healthy KitchenAid dishwasher and avoid further issues in the future!
0 responses to “How to Fix a KitchenAid Dishwasher with a Blinking Clean Light”